Equipment Listings - Other Steel Mill Equipment

NEW EQUIPMENT

Advertise or Browse Other Steel Mill Equipment

• Forging Machinery
  • IEC# 120290 - Forging Machine Mfg. GFM. Four 800 ton HYD hammers, two 4ton manipulators,150spm.
    For Information...

• Drive Motors
  • IEC# 118810 - 6000 HP (2 x 3000hp), 70/140rpm, 750 volt General Electric Reversing Mill Motor MCF, Each Motor 3250 Amps, Shunt Wound 200 Volts, 225 Amps Excitation, Pedestal Sleeve Bearing, F.V., 29,000 cfm, Mfg. 1952. Includes Spare Armature, Bearings and...
    For Information...

• Cranes
  • IEC# 118666 - 40 TON CRANE HOOK WITH NUT • Ref: 100808-000-00 • Capacity: 40 • Thread Length: 4 • Center to Neck: 13 ½ • Thread Diameter: 5 • Throat Opening: 11 ½ • Neck Length: 19 • With Nut: Yes
    For Information...
  • IEC# 118668 - 10 TON, CRANE MANUFACTURING CRANE • Ref: 101159-000-00 • Capacity: 10 • Span: 96 2 • Voltage: 230 DC • Class: E • Lift: 38 • Previous Operation: Shipping • Control Type: Full magnetic 5 speed DC • Main Hoist Speed: 60 • Bridge Speed: 350 •
    For Information...
  • IEC# 118664 - 10 TON CRANE HOOK WITH NUT • Ref: 111747-000-00 • Capacity: 10 • Thread Length – 3 • Center to Neck: 9 ½ • Thread Diameter: 2 ½ • Throat Opening: 4 • Neck Length: 7 • With Nut: Yes
    For Information...
  • IEC# 118669 - 35/15 TON, 14' GAUGE, P&H, 230 VDC TROLLEY CRANE • Ref: 101011-000-00 • Capacity: 35/15 • Gauge: 14 • Voltage: 230DC • Manufacturer: P&H • Class: F • Main Hoist Speed: 29 • Aux Hoist Speed: 77 • Trolley Speed: 150 • Overall Height: 4 1-3/4
    For Information...
  • IEC# 118665 - 15 TON CRANE HOOK WITH NUT • Ref: 110575-000-00 • Capacity: 15 • Thread Length: 4 ½ • Center to Neck: 12 • Thread Diameter: 3 ½ • Throat Opening: 6 ½ • Neck Length: 10 ½ • With Nut: Yes
    For Information...
  • IEC# 118667 - 30 TON, P&H CRANE • Ref: 111319-000-00 • Capacity: 30 • Span: 75 6 • Voltage: 460 • Manufacturer: P&H • Class: D • Lift: 34 • Previous Operation: Coil Handling • Control Type: P&H Static Stepless • Main Host Speed: 29 • Bridge Speed: 350 • Trolley
    For Information...

• Roll Banding Lines
  • IEC# 120266 - 8000# x 72" O.D. Coil Banding Line Mfg. Braner. ID/OD Turret Stacker, 8 Place Turntable.
    For Information...
  • IEC# 118671 - 4 ARM POMINI COIL TURNSTILE • Ref: 100331-000-00 • Manufacturer: Pomini Farrel • Year: 1990 • Capacity: 4 coils at 4000 lbs max • 1500 lbs coil normal • Coil size: 31.5” ID x 47.25” OD x 40” High • Bar Sizes: 3/16” to 1-3/16 diameter and square •...
    For Information...
  • IEC# 118381 - Ranger Coil Banding Line ? 3 Arm Turn Style ? Capacity of 25000# per each arm ? Push Off ? Max Coil 8000# ? Max Width 15" ? Skid Rotating Table with 6 Skid stations ? Skid banding and skid weighing on same line.
    For Information...
  • IEC# 120265 - 8000# x 66" O.D. Coil Banding Line Mfg. Ranger. I.D. Stacker, Turntable,
    For Information...

• Flying Shears
  • IEC# 120264 - 60" x .140" x 50,000# Flying Rotary Shear Mfg. Voss. 6-Hi Leveler
    For Information...
  • IEC# 118147 - Birdboro, Three (3) Square Inch (Hot), Mechanical In-line Flying Shear, Mfg. 1967. Shear has a Speed of 650 / 2000 FPM and a 40 HP Drive Motor. Features Wichita Air Clutch and Brake with Saftronics Solid State VTI Controls. Listed in very good...
    For Information...
  • IEC# 118146 - Pomini, Model CP 200, Inline Pendulum Flying Shear. Capacity: 26 Square Inches. Manufactured 1986. This Shear is a Hydraulic Design and includes the Shear, Hydraulic Pumps and Motors and Spare Parts. It is listed in very good condition.
    For Information...
  • IEC# 118388 - Side Trimming Shear, Mfg. Yasugawa, Year 1990. ? Dc Motor Drive, Over Hang Type ? Knife : ?600/ ?540×40t×4 Set ? Trimming Width : Max 50 Mm ? Housing Shift : 700 ~ 3,000 Mm ? Knife Drive Motor : Dc 210 Kw × 500/1,100 Rpm × 1 Set ? Housing Shift...
    For Information...
  • IEC# 118148 - Hydraulic Product Shear by Advance Machine Design, Model 360 – 1830. For use with 3” Diameter Steel Bars. Listed in Fair condition.
    For Information...

• Strip Shears
  • IEC# 118670 - 200 TON 66" WIDE VOEST ALPINE COLD STRIP SHEAR • Manufacturer: Voest Alpine • Age: 1998 • Nominal Capacity: 66” wide • 0.008” to 1.25” Thick • Shear Blade: 76” face • Material: Carbon Steel • Previous use: galvanizing line • Drive: 60 HP Siemens...
    For Information...

• Roll Grinders / Lathes
  • IEC# 118083 - 36” Farrell Roll Grinders • Age: 1970 • Quantity: 2 Identical Machines Available • Centers: 16’-3” • Optional Equipment: Roll Caliper, Roll Crowning • Approximate Overall Dimensions: 35’ long x 12’ wide x 9’ high • Machines are operable and...
    For Information...
  • IEC# 118660 - CRAWFORD SWIFT LATHE • Ref: 107820-000-00 • Manufacturer: Crawford Swift • Age: 1979 • Model: 25 CR • Type: Tracer (Contour) • Bed Length: 20’ • Nominal Roll Dia: 25” • Number Spindle Speeds: 18 • Range of Spindle Speeds: 2 to 100 RPM • Number of...
    For Information...

• Charging Buckets
  • IEC# 117857 - Scrap Charge Buckets with Lifting Bales, Quantity (2), Size 650 cu ft, manufactured by Ewing. Each assembly has a weight of approximately 32,000 lbs. Dimensions: 15ft height with lifting bale, 10ft 2in without bale, 9 ½ ft shell ID, 13 ½ ft max...
    For Information...